Is it possible to use liquid wallpaper in the bathroom. Liquid wallpaper for the bathroom: the right choice and application

Pasting the bathroom with liquid wallpaper - new modern method. Due to the lack of information and qualified assistance, many prefer to avoid this method, making do with the traditional ones.

For today, the choice of decorative liquid wallpaper so wide that you can rethink your idea of ​​how your bathroom should look like.

The name itself suggests that this material is not afraid of moisture. Vinyl is the most water resistant. The basis of acrylic washable wallpaper is paper with a foamed layer of acrylic applied. Not the most practical option for a room with high humidity. Glass fiber - although they are highly wear-resistant, they are not environmentally friendly. Structural wallpaper for painting will require the application of an additional protective coating.

Advice. The markings on the packaging of the wallpaper will help determine the level of water resistance.

Although this type of wallpaper is able to resist moisture, experienced professionals are unlikely to advise you to finish your bathroom. It will take a few months, as needed new renovation. If you like frequent design changes, you can not look for other ways.

So savings and practicality are very doubtful here.

A few advantages of using washable wallpaper:

  • Walls do not require special preparation
    Minor cracks and irregularities are smoothed out when applying the solution.
  • All work can be done independently

Advantages of liquid wallpaper

Advice. An interesting option wall decoration - a combination of tiles and liquid wallpaper.

Any mechanical damage to the layer is easily repaired. Desired plot soaked, scraped off the wall and applied again. After drying, there will be no seams and joints. The coating does not require adjustment of the pattern.

Liquid wallpaper versus washable

  • Long service life
  • Harmless to living organisms
  • Sun resistance
  • Material elasticity
  • Sound and heat insulation of the room
  • Antistatic and non-absorbent odors
  • maintainability
  • moisture resistance
  • Versatility and practicality

The composition of liquid wallpaper

In addition to cellulose fibers, liquid wallpaper contains components to achieve various decorative effects. It can be mica or wood chips, algae. Cotton, wool, silk are all natural ingredients. A wide variety of dyes. Such additives will affect the texture and smell of your future walls. For the formation of the solution - an adhesive.

Advice. When choosing liquid wallpaper for the bathroom, pay attention to the markings. Manufacturers indicate the degree of moisture resistance of this product.

Liquid wallpaper is sold in plastic bags and is a powder. You should not look for them on sale next to the usual types of wallpaper. They are sold, most often, in specialized departments or stores. Or you can.

material improvement

The very first liquid wallpaper was imperfect. The material actively absorbed moisture and was not suitable for use in bathrooms. To achieve the desired moisture resistance in rooms with high humidity, it was recommended to cover liquid wallpaper with a layer of varnish. In this case, the walls stopped "breathing".

The most modern developments of this material make it possible to skip this action. The walls become absolutely impervious to hot steam and splashes. Mirrors will not fog up during bath procedures, and wooden furniture will be protected from temperature fluctuations. Antifungal treatment of the wall surface may be unnecessary, since fungicides are present in the solution.

All of the above properties make liquid wallpaper a very attractive material for wall decoration. When finished, the wall will look like a tightly covered fabric.

Application technology

Sequence of work:

  • Priming the surface with a special compound
  • Fixing the primer layer with water-repellent varnish
  • Solution preparation
  • Applying the composition to the surface

Important! Leave areas near taps and plumbing free of liquid wallpaper.
Constant direct exposure to moisture can erode the coating.

The composition can be applied in several ways. Via:

  1. spray gun
  2. Hopper gun
  3. paint roller
  4. Plastic transparent grater (or plastic trowel)

The most simple and not requiring special skill is to use a paint roller. Select the dimensions of the roller according to the dimensions of the bathroom.
The diluted composition is collected in small portions and evenly rolled out by hand with a device. For applying and leveling the mass are used different types rollers. Movements should be light and smooth with little pressure.

Important! Use a short pile roller to apply. Soak it in water before use. For leveling - a roller with hard fibers. The pile should be sparse and arranged in bunches.

A mixture that is not too thick and uniform will work well with a roller. A ribbed tool can be used to achieve the desired texture.

A plastic transparent grater is essentially no different from a rectangular trowel. The advantage is that you can immediately see all the defects and inaccuracies of the work. If the layer has had time to dry a little, moisten it with water from a spray bottle. The handle of the tool has a closed shape and is located in the middle. Moisten the grater with water before mashing. If you want to get a flat surface, hold the grater at an angle of about 15 degrees, without pressing it completely against the wall. Pick up a container so that the tool can freely fit there.

Sprayers are more suitable for large areas of residential and industrial buildings. The peculiarity of this sprayer is constant pressure at least 2 atmospheres.
A hopper gun is a better fit. It has a small container in which the solution is applied. The layer is even and of good quality.

Important! If your mixture contains large decorative particles, it is better to apply the solution by hand.

Using a sprayer or gun, you will get a more embossed, textured surface. It is desirable that the temperature in the room does not exceed 15 degrees.

Work on applying liquid wallpaper is best to start from a bright place to darker places. So you will see all the inaccuracies. Work from one corner to another.
Choose the method and tool for applying based on your capabilities and the desired result.

During the drying process, the wallpaper will not emit unpleasant specific odors, remaining absolutely safe.

Give your bathroom a completely new, unique look - you can use liquid wallpaper. It does not require a lot of time and professional skills. Follow all necessary technology and application tips. The freedom to choose decorative additives in the composition of the wallpaper will make you feel like a designer of your own home. Creating unique paintings and panels on the walls with such a finish is very simple and exciting.

The bathroom was traditionally decorated with ceramic tiles. Previously, tiles were produced in one color, then manufacturers brought ceramics to the market, decorated with various paintings and patterns. Thanks to the assortment strategy, the popularity of such finishes has increased.

Later, designers suggested wallpapering the bathroom. In this way, the room can be given a completely different look, original and non-standard.

Ordinary wallpapers are exposed to moisture, so using them in conditions high humidity impractical and uneconomical. paper wallpaper can quickly fall off, and the glue will show through the paper.

The idea of ​​using wallpaper in the bathroom could be considered unsuccessful if it were not for such a modern variation of them as liquid wallpaper.

Despite the fact that today many people prefer progressive solutions, there are many who still choose the usual methods for finishing the bathroom. In particular, washable wallpaper. It is believed that neither are sufficiently resistant to moisture, they can be cleaned of dirt, dust, fungus and other external contaminants. And also that such wallpapers do not exfoliate and do not swell, therefore they can be used to decorate rooms with high humidity.

However, experts with experience say that washable wallpapers are not much different from standard ones. The only difference is that the former will remain in their original state a little longer. That is, they will fall off the walls not in a few days, but in a few months.

Of course, wallpaper has a plus - you can glue it yourself, saving on tile laying specialists. But this plus is imaginary. Ultimately, due to the fragility of the material, savings will not be provided.

Washable wallpapers are most likely suitable only for those who prefer to change their design often.

Liquid wallpaper and its benefits

Liquid wallpaper for bathrooms is a novelty that quickly gained popularity. In general, wallpapers of this type are used for decoration of various rooms. With their help, the owners get the opportunity to create a unique interior in any room.

Another important advantage of liquid wallpaper is durability. They will serve for a long time and please the eye.

Environmental friendliness can also be attributed to the advantages of this new type of wall decoration. As you know, it is moisture that contributes to the appearance of bacteria and microbes, mold on the walls. Thanks to finishing the bathroom with liquid wallpaper, this problem can be solved. The composition of the wallpaper contains natural ingredients that have antiseptic properties. They also have good antistatic properties. Therefore, they are suitable for owners of apartments and houses suffering from allergies - dust is formed on such wallpaper in a minimal amount.

The elasticity of the liquid adhesive makes it easy to apply the wallpaper. The process does not require special skills.

Additional advantages of this material are soundproofing, the ability to retain heat, and not absorb odors. This can be seen after applying the wallpaper on the walls of the bathroom.

Despite the fact that the following aspect is not of particular importance for this room, it is still worth saying that liquid wallpaper does not fade.

If for some reason the section of the walls where the liquid wallpaper is applied is damaged, you should not worry. Replacing the damaged area is quite easy. It is enough just to remove the piece that breaks the harmony and apply the wallpaper again. At the same time, it is not necessary to select a pattern so that it matches along the edges - the seamless coating does not have traces in those places where one line overlaps another.

Liquid wallpaper in the bathroom (photo) - seamless wall covering

So, the main advantages of liquid wallpaper:

  • Durability;
  • Environmental friendliness;
  • Elasticity;
  • No tendency to burn out;
  • soundproofing;
  • Heat retention;
  • Immune to odors;
  • moisture resistance;
  • No seams at the joints;
  • Easily replaceable.

The composition of liquid wallpaper

Externally, liquid wallpaper for bathrooms looks like textured decorative plaster or paint. The similarity lies in the principle of application, but the final result varies significantly.

Liquid wallpaper is sold in plastic bags and looks like dry powder. Therefore, you will not find them in traditional malls where standard wallpapers are sold. The composition of this powder is very diverse. It includes cotton or cellulose fibers, substances that help to fix the material on the walls, high quality dyes.

Liquid wallpaper got its name, among other things, due to the presence cellulose fibers. Like washable bathroom wallpapers, they adhere to wall surfaces thanks to an adhesive backing.

Before buying, you should study the composition from which the products are made. Often, manufacturers add mica, dried algae, crumbs of tree bark as components. It should be noted that specific additives do not have a significant effect on the quality of the wallpaper, but it is better to give preference to those options that are produced in accordance with the standards.

How the cons of liquid wallpaper turned into pluses

Numerous advantages make it possible to classify liquid wallpaper as a product ideal for decorating bathroom walls. Already the ability to thermal insulation alone, as well as moisture resistance, speak in favor of abandoning tiles and other traditional materials used for decorating bathrooms.

After application, liquid wallpaper looks like glass wallpaper, creating an unusual effect. The difference is that the latter are not environmentally friendly. Such a comparison also adds to the advantages of this modern version finishes.

In addition, the process of applying liquid wallpaper does not involve a number of preliminary work. For example, antifungal treatment of walls. This saves the owner time, effort and money.

Initially, the minus in the use of liquid wallpaper was seen in the fact that there was a need to cover them with a layer of varnish. Indeed, there was such a need. But it was relevant only for the first developments that appeared on the market. They consisted of cellulose fibers susceptible to moisture.

Based on consumer feedback, manufacturers quickly realized that this gap in development needed to be addressed. The deficiencies have been corrected.

Modern liquid wallpaper is resistant to moisture, in addition, it helps to successfully fight against fogging of mirrors in bathrooms, and is able to some extent protect wooden furniture from high humidity and temperature changes. Now it's the best way in order to provide an excellent microclimate in the bathroom.

The use of liquid wallpaper in the bathroom is a way to make repairs relatively inexpensive and at the same time remain as original as possible. The second is no less important than the first - most fellow citizens still live in buildings of those times when the emphasis was far from being on individualism. Accordingly, the owners have to figure out how to make housing non-standard, and even for little money. Today, in the era of the spread of non-paper types of wallpaper, even this finishing material can be used to decorate the walls in the bathroom. The main thing is to figure out how to make it all durable.

Is it possible to use liquid wallpaper for the bathroom?

Of course, you can use liquid wallpaper in the bathroom. This finishing option has a number of advantages that allow it to be successfully used in conditions of constant high humidity and temperature. An exception to the rule, perhaps, should be made only in the plumbing area in order to protect the wallpaper from direct water on them. At the same time, even laying out these areas with tiles, you can significantly save on finishing. However, the most expensive varieties of decorative material allow you not to look at all in the direction of ceramic tiles.


Pros of liquid wallpaper

Studying the advantages of liquid wallpaper, you can see that in a sense they are superior even to washable canvases, which in this case are perceived by many as an ideal. Let's take a closer look at all the benefits:

  1. Long service life. Liquid wallpaper in the bathroom is unlikely to withstand a couple of decades of use, as ceramic tile, but they are much more durable than any other wallpaper. For several years, such a finish will definitely be enough, especially since the damaged areas can be easily repaired - the specificity of the material is such that there are no noticeable seams in the place of the “patch”.
  2. Environmental friendliness. The material usually does not contain any additives that could harm human health or environment On the contrary, it is a product of natural origin.
  3. Elasticity. Both during application and after drying, the material remains plastic, that is, it is in lesser degree subject to mechanical damage. Is it worth bothering with large rolls that are easy to tear when the finish can be applied like plaster?
  4. All-round impermeability. Liquid wallpaper does not transmit sound, heat or moisture, that is, they create ideal conditions for sanitary and hygienic procedures. Moreover, unlike competitors, they do not absorb odors.
  5. Easy to mount and dismantle. You don’t have to worry that the pattern will not match - it does not exist, and even the seams when applying the material with a large difference in time will not be noticeable. If the old design is tired and you want something new, you can remove the previous finish and apply a new one. The procedure does not require any preliminary preparation - even a schoolboy will cope with the task. Complete dismantling to add new parts is optional - it is enough to apply fresh elements over the old coating.

Thus, all of the above makes liquid wallpaper great solution for the bathroom.

Possible disadvantages

Perfect building materials does not yet exist, so liquid wallpaper can also have its drawbacks. Here it should be clarified that for expensive products, the main disadvantage is precisely the cost, which scares away many buyers. If the consumer wants to save money and buy more cheap option, then it is not a fact that the material is suitable for use in the bathroom. The fact is that initially manufacturers did not recommend this type of finish for wet conditions at all, and only in last years new species have been developed that are distinguished by decent moisture resistance. If the desire to save money wins, then at least cover the wallpaper with varnish, otherwise the appearance of fungus and flaking cannot be avoided.


What is included in liquid wallpaper

In appearance, liquid wallpaper on store shelves is more like a dry dye or powdered plaster. The last comparison could be called fair, and the powder got its unusual name due to the presence of cellulose fibers. In addition to them, dyes, dry glue and cotton are also often found in the composition to improve strength. As you can see, nothing that could adversely affect your health.

Expensive options can be distinguished by smell. Manufacturers add unusual ingredients to such products, such as wood chips or dried seaweed. This will not affect the quality of the coating, but it will smell expressively and brightly, so that the guests, and the owners themselves, will be delighted!

How to properly glue

To apply liquid wallpaper on the wall, it is not necessary to call the masters - you can do it yourself. The only thing for good result it is important to follow all the rules developed over the years of using this material.

The dry mixture must be soaked in water at room temperature 12 hours before application and mixed thoroughly. Doing so more comfortable with hands- the material is environmentally friendly, so there is no danger. If the package contains glitter in a separate bag, it is poured into the bowl first. The finished mixture should be plastic, easy to spread, but also viscous enough to stick to the wall.

Before applying the wallpaper, the wall is primed for better fixation of the finish, preferably in two layers, with a break for each to dry. You can apply the mixture to the walls by any method - with a roller, sprayer, gun or trowel. The latter is usually the most practical - a little mixture is applied to it, and then, holding the tool at an angle of 10-15 degrees with respect to the surface, the mixture is laid out on the wall. The recommended layer thickness is 1-2 mm. The material will hide small irregularities of the wall surface, however, the finish itself may not lie perfectly the first time - in order to even out the protruding parts, after the application is completed, it is worth walking over it again, gently wetting it with water.

As for the time spent on work, it usually takes several hours to apply directly if one person works and we are talking about a bathroom. As for the final readiness of the repair, it is necessary to wait until the mixture is completely dry, and this already depends on the temperature and humidity of the room. It is noted that for reliable adhesion, too hot a temperature is undesirable, while drafts, an eternal problem for any other wallpaper, will not become a problem - the room can be ventilated even during operation.

It is especially worth highlighting the moment that the mixture does not have bad smell, that is, all household members can be at home, the main thing is just not to touch the walls until they dry.

Despite the fact that in the vast majority of cases it is customary to finish this place in the apartment with ceramic tiles, liquid wallpaper in the bathroom is becoming increasingly popular.

Be that as it may, the approach to design and decoration does not stand still. Over time, various types of tiles began to appear, which were painted in other, brighter and more attractive colors. This began to be done "as opposed to" white, which traditionally was almost the only option that was used in the decoration.

At some point, the designers decided to try using wallpaper to decorate the walls of the bathroom. This made it possible to create an attractive and original interior. Unfortunately, it proved to be nowhere near as practical as ceramic tiles, which had an excellent ability to cope with prolonged exposure to moisture and fumes. It was precisely when faced with this problem that apartment owners, as well as wall decorators, began to wonder whether it was possible to use liquid wallpaper in the bathroom. And it turned out that not only is it possible, but, based on certain requirements, it is even recommended.

On a note! The use of liquid wallpaper in the bathroom has become possible thanks to the introduction of new technologies for their production.

It would seem that not so long ago this material was not common, not only in the bathroom, but in general, it was practically not used when decorating an apartment. However, today we are increasingly using liquid wallpaper in the bathroom. Reviews of many apartment owners indicate that this finishing material has a significant number of advantages that distinguish it from some other analogues, including more traditional ones.

However, there are certain downsides as well. So, it is believed that liquid wallpaper, when used in the interior of the bathroom, does not swell, because this is due to their ability to withstand moisture. However, some cases show that this is not the case, especially when it comes to bathrooms in high level exposure to moisture and frequent use of the shower.

In addition, do not forget that such wallpapers are not so easy to apply to the wall, since the process of installing them with your own hands requires a certain level of training. In fact, speaking to the end, liquid wallpaper, in its structure and method of application, resembles rather decorative plaster than the more familiar vinyl, paper or non-woven rolls.

Be that as it may, the advantages of liquid wallpaper, when used for finishing the walls of the bathroom, are more than the minuses. We can say that most of these advantages manifest themselves in other rooms, and not just in those characterized by a high level of exposure to moisture on walls or ceilings. They will make the room more interesting and unusual in terms of design. In addition, their service life is long enough, which cannot but please the owner of the apartment in terms of durability.

Let's not forget about such an important parameter as environmental cleanliness. The fact is that in most cases, constant and long-term exposure to moist air, as well as direct water on the walls, cause the formation of fungus, mold and other unpleasant phenomena. In addition, there is a huge number of bacteria that feel very comfortable in such conditions. Naturally, all this has an extremely negative effect on the general situation in the apartment, and also poses certain threats to the health of all its inhabitants. So, liquid wallpaper in the bathroom will help you avoid all these problems.

It was noted a little higher that the application of this material requires the presence of certain skills and a person's experience in carrying out such work. However, as long as you can understand the basic instructions, applying this type of finish on your own is not difficult. In addition, the errors that are characteristic of initial stage any kind of work will be kept to a minimum. Rather, their consequences will be minimal, since it is not as noticeable as, for example, when gluing vinyl wallpaper.

It is also easy to repair a damaged area of ​​\u200b\u200bthe coating. Moreover, you will not even notice that some of the sections have been damaged. This is also one of the advantages, especially when compared with traditional roll wallpaper. To close up a problem area, you just need to apply the same liquid wallpaper on it. That's all! Let's give a short list of the advantages that this wonderful material has:

  • Ecological safety for the person.
  • They do not fade in the sun.
  • Better retain heat indoors.
  • They are easy to repair.
  • Long service life.
  • No joints.

Of course, there are other advantages as well. However, the ones mentioned above are the most obvious ones that directly affect the choice of buyers. If you are interested in the topic of the positive and negative aspects of this material, we advise you to study the material about the advantages and disadvantages of liquid wallpaper.

Liquid wallpaper, as you know, is largely different from its "brothers", which we are traditionally used to buying in rolls and gluing to the wall. If we talk about how they look before the composition is prepared for application, then we can draw a parallel with the granules. In other words, their appearance resembles a kind of dry powder-granulate.

As far as the composition of this coating is concerned, it is distinguished by a noticeable diversity. In addition to a special composition that helps to fix the finish on the wall, there are special colors that determine the color of the finish, as well as cellulose and cotton, of course, in the form of fibrous granules.

Attention! Some manufacturers add special additives, such as crushed tree bark.

Many people who first come across this type of finishing coating are quite rightly wondering how and what is the best way to apply them to the walls. The installation process is discussed in more detail in the article "How to glue liquid wallpaper: step-by-step instructions." However, let's list the main steps that you will have to go through in order to apply liquid wallpaper in the bathroom (as, indeed, in any other room):

  1. Preparation of walls before applying liquid wallpaper, including the use of a primer.
  2. Using a special colorless varnish over the primer.
  3. The composition is being prepared for application: a mass is made from liquid granules with a consistency that resembles high-fat sour cream.
  4. After everything is ready, liquid wallpaper can be applied to the wall.

As a rule, the application is carried out with a spatula, as well as a grater, which is used when working with plaster. In some cases, the use of a paint roller or a paint gun is allowed. Be that as it may, the application process itself will not take you much time. On the other hand, preparation, including moving furniture, rugs, dismantling cabinets and other similar work, can take several hours.

There are many traditional bathroom decor materials on the market. But if there is a desire to try something new and make the bathroom unique, then they will help you. First of all, it is worth knowing what it is.

Liquid wallpaper does not look like ordinary wallpaper at all. They are not rolled up, there is no pattern on them. Most likely, the novelty resembles plaster in the form of multi-colored flakes. The composition of the finishing material includes cellulose or cotton, glue, dyes and decorative components: sparkles, quartz chips, mica, gold and silver threads. Liquid wallpaper is hygroscopic and recommended for rooms with high humidity.

Liquid wallpaper: pros and cons

Consider the main advantages of this material:

  1. Durability . Composite liquid wallpaper is resistant to moisture, temperature changes and environmental influences. The adhesive will securely adhere the finish to the surface.
  2. Versatility. This material is suitable for decoration of residential and bathrooms, offices and commercial premises. They can be applied to any surface: concrete, wood, plaster, drywall, paint or metal.
  3. Environmental friendliness. The lining contains natural ingredients. Liquid wallpaper allows air to pass through, does not attract dust, fungi and mold do not breed in them, and are an excellent heat and sound insulating material.
  4. Practicality. For gluing with liquid wallpaper, you do not need to perfectly level the surface. The material will hide all the imperfections of the walls, clog the cracks and even out the bumps. The wallpaper does not have seams, so the surfaces after the repair remain smooth.

Advice ! In case of damage, the lining is easy to repair, it is enough to wet and remove the damaged area with a spatula. Apply a new layer of wallpaper to this place.

Unfortunately, this material has its drawbacks:

  1. High price. To purchase the required amount of liquid wallpaper, you will have to pay an amount 2-3 times more than for traditional wallpaper in rolls.
  2. Wash off with water. If the owners are fans of cleanliness and like to wash everything, then liquid wallpaper is not for them. From rubbing with a wet cloth, they will quickly wash off. You can resort to covering the wallpaper with transparent varnish, but then the walls will stop "breathing". A heavily soiled area is best removed and replaced with a new one.
  3. Laborious application process. We always want to finish renovation of the apartment as soon as possible. But in order not to do it often, it is still worth spending time and energy preparing surfaces, as well as wallpapering. You need to tune in to the fact that the liquid lining dries for a long time.

A variety of liquid wallpaper

In specialized outlets for those wishing to make repairs, a large selection of wall coverings in the bathroom, as well as the ceiling, is presented. Liquid wallpaper is presented in a variety of color schemes, with the addition of decorative materials and without them. Experts distinguish only three main types of this finish:

  • silk look, consists of silk fibers. Despite the high price, this type of coating leads in terms of aesthetic appearance. It is more resistant to ultraviolet rays, so it remains bright for many years;
  • cellulose type of finish, it is much cheaper and suitable for budget repair. The main component of the finishing material is cellulose. They are recommended to be used for facing the walls of the hallway, corridor or loggia;
  • combined - this type is most often presented on the building materials market. The composition of the facing mixture includes silk and cellulose fibers. The price of this material depends on the amount of artificial silk in the lining. The more it is, the more expensive the wallpaper.

In building materials stores, you can find several types of packaging for liquid wallpaper for the bathroom. They are divided according to readiness for use:

  1. IN plastic containers sell ready-made mixtures in the form of pastes with the addition of various paints.
  2. The packages offer a dry mix in the form of flakes, to which mineral dyes and texture materials are added.
  3. Basic dry mixes to which dyes and texture components must be added.

Advice ! To create your own unique design in the bathroom, you can buy other additional ingredients that are ideal for the interior of the room.

In specialized outlets, liquid wallpaper for the bathroom is most often sold in plastic bags and buckets. When dry, they look like flakes or sawdust, when diluted, they look like a paste-like mixture of all the constituent and additional components.

Some manufacturers add mica, crumbs of tree bark, algae to liquid wallpaper for the bathroom. Such components will not only not spoil the quality of the mixture, but will also serve as flavors.

The technology of applying liquid wallpaper

Before you start applying the material to the walls in the bathroom or toilet, you need to familiarize yourself with the process technology, the quality and durability of the coating will depend on the correctness of which.

Attention ! The elasticity of the material will allow you to use it to level the walls in the bathroom or toilet. It is possible to correct surface defects, to process as much as possible the places where sockets and skirting boards fit.

According to average calculations, 1 package is enough to process 5 square meters. meters in the bathroom.

Preparatory work

Haste and negligence negatively affect the quality of the work performed and the appearance of the surfaces in the bathroom.

Before decorating the wall decorative cladding, it must be cleaned from previous layers. A primer is carefully applied to the cleaned surface. Dry walls and ceiling, in the bathroom, are covered with a water-repellent colorless varnish.

Before using liquid wallpaper in the bathroom, carefully study the instructions. If you purchased a dry mixture, then it is diluted in a clean and deep container with water, to the state of thick sour cream. Then, for 12 hours, the wallpaper is left to infuse, covering the bucket with a lid. This mixture is suitable for use up to 10-14 days.

Metal surfaces in the bathroom, before applying the material, must be treated in an appropriate way. To do this, they need to be painted with alkyd enamel, all cracks and joints should be sealed with sickle, and putty should be applied. This is followed by a double layer of enamel and waterproof paint.

Plasterboard and wooden coverings in the bathroom puttied and covered water-based paint to avoid warping and tearing.

Applying liquid wallpaper

The mixture is applied with a special gun, grater or roller. If they are not running out of time and there is a mood to work, then it is better to do the whole process manually, using a grater.

The finished mixture must be applied and distributed over small area surfaces. A layer of liquid wallpaper should evenly cover the wall, without voids and bulges. Do not press the grater very tightly against the wall. It should be held at an angle of 15 degrees.

The next portion of the mixture must be distributed to the second section. The joints should not stand out, so they must be carefully rubbed. If the surface has a defect, then another layer of liquid wallpaper should be applied.

Attention ! Decorative fibers lie in the direction in which smoothing is performed. It is recommended to apply liquid wallpaper in the opposite direction from the bright corner of the bathroom.

After applying the material to the wall, it is necessary to dry the decorative coating. Drying time ranges from 12 hours to 3 days. During drying, the treated walls should be protected from mechanical damage.

To finish the bathroom with liquid wallpaper, you need to stock up on time and patience. Before work, you must definitely read the instructions for use, as well as "train" in a small area.

Conclusion

Liquid wallpaper has become a universal finishing and decorative material for the bathroom. Their use allows you to create an interesting interior, due to the fact that manufacturers add various additional components to the mixture. Thanks to them, the interior becomes original and of high quality. The high price of liquid wallpaper is a guarantee of the quality and durability of your repair.

After learning about what the so-called liquid wallpaper is and realizing how practical they are, you can start applying them. You can learn more about the application technology from the following video

Liked the article? Share it
Print article
Top