How to make different types of homemade mixers. Nozzle on a drill for mixing a solution, can I use a hammer drill as a mixer? Varieties of nozzle attachment systems

In the bins of most average owners. For many, the tool just gathers dust in the closet. Some regularly use it, painstakingly drilling holes, screwing shelves and screwing bolts. And only the most creative and out-of-the-box thinking minds use the drill for other purposes. Just think - they chop wood with a tool and replace most household appliances with a household drill, spending money on more interesting needs and striking with their imagination!

Read the article and find out how to pass for not only a homely, but also a resourceful owner. The task is made easier by the fact that the necessary supplies are probably at your fingertips, and the implementation of great ideas will not take (in some cases) even 10 minutes.

A drill is like a mixer - when the impossible is possible!

It would seem - what unites these two different devices? Drilling, as a rule, is done by men, but is in the competence of women. Let's look under the case, and everything will be resolved: inside both devices there are brushes of the electric motor, set in motion by the pressed start button. They turn the rotor of the engine, and it transmits the torque to the gearbox, which sets in motion a cartridge with a drill, like a drill, or "corollas" like a kitchen mixer.

Converting a drill into a kitchen assistant will take you no more than 5 minutes and will be especially relevant when it is out of order.

Electric meat grinder from a drill - it turns out, it’s quite real

It would seem that a strange desire - to make a drill - in some cases gives unexpected results. So, the situation can be saved when the knives of the kitchen unit are completely blunt and threaten to ruin the party with homemade cutlets. Now you will learn how to make a meat grinder from a drill: guests will praise the hostess for cutlets, and her husband for resourcefulness.

For the craftsman, everything is clear. You need to prepare the following items:

  • manual old meat grinder (precisely manual, with which it was so long and hard to work!);
  • electric drill;
  • metal bolt with a hexagonal top. The bolt must be without a cap.

What is even more surprising: many build such equipment specifically before the start of conservation. According to reviews, she does a great job with tomato juice: so fast that the helpers don't have time to wash and cut the tomatoes!

How to chop wood with a drill? Just!

It turns out that with the help of a construction tool you can do just that! Moreover, such a splitting of firewood is no worse the usual way, with an ax - so say experienced householders. What needs to be prepared for this? In addition to a drill - almost nothing, except perhaps.

Having set a moderate number of revolutions (a large number of them will not speed up the process, but will lead to a lot of chips flying in all directions), we proceed to the most important thing:

  • We install the log so that the cone is located right in its center, perpendicular to the log - splitting will be quick and hassle-free.
  • Gently rotate it three times in one direction, then in the other.

Advice:since you will be chopping wood at low speeds, a low-power drill is enough, like an inexpensive one weighing 1.3 kilograms.

They say, makeshift fixture ideal for apple firewood with a diameter of 10-12 cm, also suitable for hardwood firewood.

A powerful fan from a drill is a good option in the heat

If you want to seriously get confused, make a fan with your own hands. Here's what you need.

When mixing putty, resins, concrete and plaster, as well as when tinting paint, the whisk attachment is indispensable, which is attached to a puncher or drill and speeds up the mixing process. The mixer allows you to qualitatively mix the mortar or tint acrylic, while it costs a penny and requires parish school knowledge to use. Below, the Stroyremontiruy blog will tell you how to choose a nozzle, taking into account the purpose of use and the features of the puncher.

What are the nozzles

The choice of mixer-type nozzles is sufficient today, but to choose best option it’s not so easy for yourself, because mixers differ in:

  1. Brenda,
  2. shank type,
  3. Basket diameter and height
  4. Length.

There are no problems with the brand, since the whisk is not a complicated technique, where the brand of the manufacturer plays a big role, but it is more difficult to choose a nozzle according to the shank and the size of the basket.

Brand

In this part, we will be concise for the reasons indicated above. Among the brands we highlight:

  1. Bosch,
  2. FIOLENT,
  3. STARTUL,
  4. GEPARD,

Of course, Bosch will last longer and will not create problems in use, but brand choice only matters for pros who use attachments for work on a daily basis. If you make repairs with your own hands and you need a mixer occasionally, then the brand of the manufacturer is unprincipled.

Importance of parameter ★★★.

Shank type

Here more attention is required, since according to the type of whisk shank there are:

  1. cylindrical,
  2. Hexagonal
  3. SDL Plus.

See which connector is on the puncher or drill and choose from here the shank by type. For Bosch rotary hammers, SDL-Plus shanks are suitable, which have 4 grooves - 2 open and two closed. For drills, cylindrical shanks are suitable, less often hexagonal. When choosing a hex shank, keep in mind that the diameter of the mixer will be equal to the diameter of the drill.

It’s easier when buying to indicate to the seller which hammer or drill you will use for kneading, and he will select you a nozzle with the desired type of shank.

Importance of parameter ★★★★★.

Basket height and diameter

The height of the whisk basket is usually 100-110 mm, and the diameter is 80-150 mm. For a powerful hammer drill and for large mixing volumes, choose a nozzle with maximum dimensions baskets, if you have a small drill and you don’t need to knead a lot of mortar, then choose the minimum size of the basket.

Importance of parameter ★.

Mixer length

The length of the mixer is from 40 to 60 cm, so there is a choice here. It is easy to choose a nozzle according to the parameter - the higher the mixing capacity is used, the longer the whisk should have. We recommend a length of 50-60 cm, this will be enough for mixing putty in a plastic bucket or plaster in a special box, a small supply of problems will not create.

Mixer 120x600 mm SDS + STARTUL is a right-handed spiral and is suitable for drills and rotary hammers with SDL-Plus connector. The recommended mixing speed is 600 rpm, the nozzle is used for all types of heavy and viscous mixtures (plasters, putties, resins, concretes, etc.).

The M14 GEPARD whisk 120x600 mm has an M14 shank with a basket height and diameter of 105/120 mm. By configuration, this is a right-handed spiral, the optimal rotational speed at a batch of 600 rpm.

Every woman sometimes wakes up with a desire to cook something, but the necessary electrical appliances may not always be in the kitchen. For example, it is almost impossible to cook a bizet or beat a protein without a whisk or mixer. Do not give up the idea due to the lack of any devices, make a mini-mixer with your own hands and turn your culinary ideas into reality.
Store-bought yogurt is not always healthy. Its long shelf life (up to 6 months) is questionable. You can make exactly the same yogurt at home.

Let's watch the video of the mixer:

For this you will need:
For yogurt
-Strawberry;
- sour cream;
- sugar;

For mixer
- a motor, preferably more powerful, since it will be difficult for him to grind. Can be removed from an old cassette recorder.
- a small piece of a tin, can be cut off from a tin with a drink;
- regular plastic cover for a bank;
- two plastic cups;
- switch;
- power supply (depending on how many volts you have a motor). In our case, the motor is 8.5 volts.
- screwdriver.


We take a plastic cup and a screwdriver. We heat the edge of the screwdriver with a lighter so that it can calmly melt the cent of the plastic cup.
When we got a small hole in the center of the cup, we need to insert a motor into it and circle its edges with a marker. So we mark where it will be. We take out the motor and continue to work with a plastic cup.


Along the edge, which we circled with a marker, we draw with a sharp or clerical knife. As a result, we should get a large hole in the bottom of the glass. Our motor should easily pass through this hole. Make a hole with a diameter slightly smaller than the motor, it should not fall out, the edges of the cup should hold it.


Then we measure the height of the motor (let it be 3 cm). We will have to leave exactly the same height at the cup in which we made a hole for the motor at the bottom. We leave our 3 cm - we cut off everything else.


In the workpiece, we cut out a place for the switch and a hole for the wire.


There are always 2 or more wires in the power supply. We need a power supply with 2 wires. We solder 1 wire to the switch, and the second to the motor. Take another small copper wire and connect the switch and the motor together.

As a result, you should get a workpiece in height slightly larger than our motor, in which a hole for the switch, a hole for the wire and a hole for the motor will be made. To prevent the switch and the motor from falling out, they can be fixed with super glue.


Next, we take a thin piece of tin and make a small ring out of it. To the second small pieces of the tin, we wrap this ring in the middle to make a butterfly. We should get an impromptu screw.


We glue the silicone nozzle to the improvised screw with glue, which will then be put on the pin.


While the glue dries and fixes on the tin, we return to our workpiece with a motor.

We turn the cut side to face the table, a round plastic surface with a non-protruding motor in the central part should look at us.

We take the second glass, where in the central part at the bottom, a hole has already been made in advance and install it on the motor. You should get a glass on a stand. There should be a centimeter pin in the center of the cup.

Once the glue is dry, install the screw.

During repair and finishing works Oh, each of you has come across such a highly specialized tool as a construction mixer, and you all know very well that its indispensability is difficult to overestimate. You can use a hammer drill or a drill, but in the end, when the tool fails, every experimenter will understand that this was not a good idea. In this article we will not talk about mixers, the topic of our today's article is devoted to attachments for this indispensable finishing tool.

One or two nozzles?

When choosing a construction mixer, you can see that some models of this tool are equipped with two spindles, which allows you to put two rotating nozzles at once. The differences between them are obvious. Duplex mixers are designed to work with a large volume of finishing mix during continuous use. The advantages can be added to the speed of work, such a mixer will quickly make the mixture homogeneous. And, of course, it costs more, so if you don't intend to use the mixer every day, go for a single spindle mixer.

Nozzle attachment methods

There are four ways to attach attachments to a mixer, and they all have their advantages and disadvantages.

  • M14. The most common type of attachment. On the vast majority of nozzles, you will see just such a mount. In fact, this is an ordinary clamping nut that completely copes with its task. I think that soon all manufacturers will produce nozzles with just such a mount.
  • sds plus. Fastening for a keyless chuck, 10 mm in diameter. Usually it can be found on perforators. It should be noted that it perceives torque well, the nozzle is quickly inserted into the mixer. But many reproach him for the unreliability and the difficulty of repairing in the event of a breakdown.
  • hex. Regular hex shank. Such cartridges are often found on drill mixers. With small volumes of work will cope with the tasks.
  • Morse taper. Mounting in the form of a cone, the socket in the cartridge also resembles a cone. The most reliable fastening among all and at the same time it can be found only on expensive models of mixers. For example, the DeWALT DW 152 model costs about 22 thousand rubles, you are unlikely to consider this tool for purchase.

The shape of the working part and dimensions

Almost all nozzles for a construction mixer have the same size in length equal to 600 mm. And this is understandable, with such a length it will be convenient for a person to work with a mixer without fear for his back. If you wish, you can get all kinds of extension cords and knead the mixtures in a large barrel, although it is unlikely that such a crazy idea will come to someone's head. As for the diameter of the rod, this value is from 120 to 160 mm. But on the working part, we will dwell in more detail.

  • Spiral. It can be in two versions: right-handed and left-handed. The first is designed to lift the mix up and is therefore suitable for heavy cement formulations such as tile adhesive. The left-hand one lowers the mixture down, eliminating splashing. Ideal for putties and all kinds of suspensions. If the mixer is equipped with a reverse, then the choice of spiral is reduced to a minimum. With one movement, you can make the spiral rotate both to the left and to the right.

  • cross. With the help of such a nozzle, it is good to mix the mixture, where it is necessary to exclude the ingress of air. During the operation of the mixer, mixing takes place strictly in a horizontal plane. When working with sealants and gypsum mixtures, such a nozzle is simply irreplaceable.

  • Screw. Designed for stirring more liquid mixtures such as varnishes and paints. The nozzle can have two screws, working with such a nozzle, the upper screw will push the mixture down, and the lower one, on the contrary, down. With such work, high-quality mixing is ensured, and there will be much less spatter.

There are many highly specialized attachments for various finishing mixes, but the above options will be enough for you to accurately select the attachment for the construction mixer. It is better to pay attention to the tool itself, there are much more selection criteria.

A drill mixer is a great helper for any builder. Such devices have a fairly powerful engine and two ergonomic handles, which are necessary in order to hold the tool while mixing mortars and mixtures. This is a convenient mechanism that combines several important functions at once.

purpose

The construction sector of the industry does not stand still - every year new compositions appear that are used for the construction of structures, small and overhaul. Both glue and plaster and many other materials go on sale in the form of a powder, which must be diluted with water in order to make a full-fledged composition out of it.

In order for the components of the mixture to be mixed as efficiently as possible and to form a homogeneous working mass, it is necessary to choose the right tool. For example, if you can mix wallpaper paste with an ordinary stick, then for cement mortars and putty which method will be ineffective, especially if you need a solution in large volumes.

Mixing building mixtures with improvised means, as a rule, does not give the desired quality of the working composition: many lumps form in it and a large percentage of dry matter remains, which could not get wet properly.

Many users in such situations resort to a puncher, which has the necessary rotation capability; however, experts do not recommend using this method, since the hammer is initially oriented to loads in a different plane without any influence of radial forces. Of course, you can knead a small volume of the solution with it, but in large quantities you risk simply damaging your tool, which, by the way, is quite expensive.

Great solution in this situation, it may be the purchase of a drill-mixer, which is optimal for mixing compositions in a volume of up to 15 liters in one go.

Such devices are optimal both in everyday life and when carrying out professional repairs. Unlike a hammer drill and a conventional drill, they have a stronger bearing, in addition, the mechanism is equipped with a powerful gearbox, which is protected by a particularly durable metal case. Thanks to this set the device can work even at the lowest speed.

An important advantage is also the fact that such the construction mixer can simultaneously perform the function of drilling the surface, that is, in fact, it is a 2 in 1 device.

Types of structures and their characteristics

The drill mixer is used for repair work in large volumes; the user usually holds it in his hands when mixing the solution, because the device has ergonomic handles that make the operation of the tool less laborious. If the engine of the device has a power of more than 1 kW, then a special gearbox is built into it: it is suitable for use not only at the very first speed, but also when switching from first to second.

The first is used to make thick dense mixtures, for example, mastic, and the second - for gypsum and cement. At the second speed it is also possible to stir paints and other liquid substances with a minimum torque.

In order to make work more comfortable, it is better to use tools that are supplemented with a speed stabilizer or inrush current limiters.

Such drills, as a rule, have a different configuration. Usually, they come with several types of nozzles, which can have several shapes.

  • Right hand spiral mixing attachment- used for such solutions that have a very viscous structure. These include cement, concrete, as well as various kinds of plasters and glue. Such a nozzle kneads the solution, as if pushing it from the bottom up, the composition is mixed at the top, and then falls back.
  • Left-handed spiral nozzle ideal for mixing paints and varnishes. Here reverse principle work: the mixture is pushed from top to bottom, where it is stirred and rises back.
  • Screw nozzles allow you to mix light compositions.
  • cross- a more specialized nozzle, it is used in cases where it is very important to prevent air from entering the container with the mixture.

Advantages and disadvantages

The main advantage of the drill-mixer is the possibility of its multifunctional use. On the one hand, the tool is referred to as a drill, therefore, in addition to mixing mortars, it can be used to form holes in surfaces different type, even the most hard and dense. On the other hand, a drill of this type belongs to the category of low-speed ones, therefore it cannot replace the drill by 100%, but at the same time, it is low speeds that make it possible to knead even the densest compositions.

Obviously, such a design cannot be used in industrial volumes, its power and design features not enough to cope with intensive use. But with the solution of small everyday tasks for minor repairs and decoration of an apartment or a private house, she will cope in full.

Such a drill weighs much more than a conventional one: its weight is more than 3 kg, so frequent drilling with such a unit is associated with significant physical effort.

Principle of operation and features of use

Depending on the principle of operation, there are three types of tools:

  • drill mixer;
  • drill mixer with one whisk;
  • device with two beaters.

A conventional electric drill-mixer is a low-speed shockless type mechanisms. The power of this tool ranges from 500 to 2000 W, there are 2 comfortable handles, a rather large cartridge with a diameter of up to 16 mm.

Two-handed models are divided into options with a single whisk or two, the difference follows already from the name: mechanisms with two whisks mix even the most viscous mixture, they are equipped with a fairly powerful gearbox and easily cope with solutions of a wide variety of consistency - from light to concrete.

Model Rating

The following brands are the most popular among consumers.

  • Fiolent- This is a Russian-made product, which is optimal for stirring the most dense and viscous formulations. The power of the device is 1100 W, and the speed is 600 rpm.
  • Rebir- under this brand the most popular low-speed drills are issued. Individual models from this manufacturer have exceptional performance: power up to 2000 W and rotation speed up to 500 rpm.

  • Interskol– offers a wide range of mixer drills with power up to 1050 watts. Such a tool is optimal for mixing any building mixtures, even concrete, and also for drilling: for example, if you place a special drill for wood in it, you can get a hole up to 1 m long in a matter of seconds.
  • BISON- This is one of the most popular brands in the domestic market. The models presented in the assortment of this manufacturer have exceptional power parameters - up to 1200 W - and rotation speeds (up to 850 rpm).
  • Makita is a well-known Japanese brand, which is in demand all over the world due to its quality and reliability. It is noteworthy that all models of this brand, in addition to excellent specifications, are also practical, because they consume much less energy than competitors.

How to choose?

  • product weight - in the range of 2.7-4.5 kg;
  • power - 620-110 W;
  • rotation speed - up to 1050 rpm;
  • torque - 70 N / m.

In addition, when choosing a suitable model, pay attention to additional functions that may be useful to you: soft start, mode automatic start, additional insulation of the case, protection against overheating and others.

How to do it yourself?

If you wish, you can make a construction mixer with your own hands. For this, you need to use the most ordinary drill as a drive, and any product with a shank made in the form of a hexagon is suitable as a nozzle. Such a device is quite easily fixed in the drill chuck, the main thing is that the dimensions of this hexagon correspond to the minimum size of the chamber that can be placed in the chuck.

However, keep in mind that the motors and gearbox of a standard agitator are designed exclusively for a longitudinal surface, so only very small portions of the building mixture can be kneaded with such a homemade tool.

IN next video you are waiting for the main features of mixer drills.

Liked the article? Share it
Print article
Top