Crafts from plastic pipes for all occasions. DIY pipe bed Bed made of pvc pipes

Long vacations make it possible to make trips to distant friends, and find that their families have grown and they have found new ones. interesting ways place the younger generation on the same footage of living space. Moreover, this applies not only to citizens of our country, but to distant "foreign countries" where they do not know what mm is, but use strange inches :)) It is clear that if it does not work out to grow in breadth, then we will grow up. Long live the second tier, and maybe the third :)). It is clear that no one offers to live in a reserved seat of a train, but to use the opportunities that come off, as they say ...

But what if you are not a woodworking specialist or you do not have everything necessary tool. Let's use plastic pipes. Interesting? Unusual?
And so we have: high density polyethylene (PVP), low density polyethylene (LDP), polypropylene (PP) and polyvinyl chloride (PVC). Let's take 40 mm thick-walled polypropylene pipes and assemble them, what? What do we want. Yes, like a bunk bed.

And so we need, well, of course the pipes themselves, a pipe cutter, you can get by with a hacksaw for metal, how we will connect, glue or a welding machine for pipes, you can consider as an option and threaded connection, but I think this complicates my task. Yes, more fittings are required. Hands and a measuring tool, and don't forget your head.

First of all, you need to draw everything,

ok - you can do it in your head, but it’s better on paper with a pencil, then, to the best of your depravity, repeat it on a computer or on graph paper. Do not forget to take into account the allowances that will be included in the fasteners. Hurray, we calculated how much of what is needed and you can gallop to the store at a trot, of course, or if you know how to amble :)).

We drag all this wealth into the hole and begin to measure and cut, cut and measure, something there seven times, and something one :)) the main thing is not to confuse. If there is no cutter, then it will be very convenient to cut on the device that we made: a cutting device

We prepared the parts, we assemble them, so we stand without fanaticism and glue, but nothing needs to be welded yet. We make a control assembly.
Gathered? Fine. No, it doesn’t matter, we check the calculations, we look for misses and annoying errors, did you find it corrected? Uraa we collect on a new one, now everything is assembled?

We begin the final assembly with glue or welding. Stop again :) I'm sick of you? Wait a locomotive, there is another secret, if you run wires inside and place LEDs - do you dare?

That's probably all.

How long will it last? As you do, there is a clear fact of the existence of such a device for 8 years :)),
from 4 to 12 years old. The bed in the process, what it didn’t become and how many additional devices were screwed glued and taped to it, and how it didn’t become both a ship and a submarine, no matter what color it was.

Create any furniture, light, durable - turn on your imagination.

PS do not forget to attach it to the wall :))
ZYY to increase the strength inside the pipes, you can insert even thinner ones, it is especially worth doing for the stairs, since there the load is greater than in other places.

Do not pay attention to the dimensions in the diagrams, they are in inches, and as the comrade initially said, the experimental ones do not take into account the tolerances for pasting, etc. Just for an example of how to plan a structure, you divide the vertical racks for yourself and the stairs, respectively.

With PVC pipes. But greenhouses and sheds are far from all that can be made from PVC and aluminum pipes with different diameters. Furniture, decorative items for the home, organizers, shelving, even weapons are beautiful bows of various shapes. People's fantasy is constantly being embodied in new PVC forms, and we have compiled a selection of the most interesting DIY projects for you.

Let's start with homemade furniture made of aluminum and PVC pipes connected with fittings. There are children's furniture, and options for adults, cute designs that will fit into any interior, and racks with many shelves.

DIY pipe furniture

1. Low table made of pipes and wood

Table made of pipes and wood

Here is a detailed video tutorial on how to make it.

2. Dining table

Dinner table

This table of three boards and metal pipes can be used as lunch. A note of industrial style in the design of the room. you can see the manufacturing technology.

3. Large rack made of pipes and wood

Storage rack

Shelving for a spacious pantry or garage - perfect solution to store all sorts of things. And durable and looks great. Read the assembly guide.

4. Shelving for the room

hall rack

TV, audio system, souvenirs and books - everything will fit on this homemade rack. Let's see how to make it.

5. Another rack

Shelving made of metal and wood

The shape of this rack is somewhat unusual, as if it was planned for specific items. Looks cool with paintings, figurines and other content. there is a list of building materials and a story about the manufacture.

6. Coffee table with glass top

Coffee table

The legs of this table are made of bent and painted PVC pipes. As for the countertop, you don't have to make it out of glass, but it certainly looks cooler that way. you will find the manufacturing manual.

7. Aluminum tube bed

Bed with aluminum tube frame

Large bed frame with canopy made of aluminum pipes and fittings. Manufacturing guide.

8. A simpler bed made of pipes and wood

Bed made of pipes and wood

This bed looks simpler, and it's easier to make it. You will need pipes, fittings, wooden "ribs" and a fabrication manual.

9. Canopy over the crib

Canopy over the bed

Anyone can make this simple PVC pipe canopy. It turns out a children's bed with a canopy of tulle.

10. Simple towel rack

Towel dryer

A few PVC pipes and fittings, and the towel dryer is ready.

11. Cute chairs for kids

Chairs for children

These cute chairs are quite possible to make yourself. Frame made of PVC pipes and seat woven from threads. How to braid chairs, you can see.

12. Simple chairs for hiking

Outdoor chairs

Small comfortable chairs for the patio or outdoor trips. Bright furniture will surely appeal to children. How to make such chairs, see.

13. Place to play

Place for games

For kids, you can organize a place to play with a PVC frame.

14. Bar counter in the style of a beach holiday

bar counter

PVC pipes painted to look like bamboo, various attributes like exotic masks and thatched roof- this bar counter will be a great reminder of exotic hot countries and beach holidays. Read detailed instructions for manufacturing.

15. Simple and convenient drawing tablet

PVC tablet

This lightweight drawing tablet is great for homework. You do not need to attach paper to it - the album is placed on a special stand along the bottom edge of the tablet. How to make it, read.

Organizers and shelves

16. Desk Organizer

Simple Desk Organizer

20. Creative wine shelf

wine stand

If you need a stand for a maximum of four or five bottles, you can make such a PVC creative. And it's easy to do and looks great.

21. Laptop stand

Notebook Stand

Simple and comfortable stand for working with a laptop.

Decorative interior elements and gifts

22. Cornice for curtains

Curtain rod

Nice cornice made of painted PVC pipes and decorative elements. More about manufacturing.

23. Dresser decoration

dresser decoration

PVC pipes, cut into thin rings, can serve as decoration for furniture.

24. Creative mirror frame

mirror frame

And again PVC pipes, cut into thin rings. Cut, arrange in the right order, glue together and admire the new frame.

25. Piggy bank

Piggy bank

This funny pig with a PVC pipe base can be given as a gift or kept at home as a souvenir. Here

With skill and a rich imagination, interesting and useful things can be made from any available materials, including plastic pipes.

plastic pipes different diameter are sold at any hardware store at very affordable prices. They are used in plumbing, sewerage, heating, irrigation systems, and after construction or repair, unnecessary trimming often clogs the site, while it can serve as an excellent material for creative crafts.

Do not rush to take construction waste to the landfill - we will tell you what can be done from a plastic pipe to turn excess residue into beautiful and functional interior items.

What is good plastic pipe?

We will not talk about the direct purpose of the product, but about the convenience of using varieties of plastic pipes precisely as a material for crafts. Plastic pipes have a light weight are strong and durable enough. They are resistant to dirt, do not collect dust and are easy to clean. Products made of plastic pipes are safe to use even by small children (they do not break, do not have a heavy weight, do not emit toxins).

For creative work, PVC pipes are more often used, which are quite rigid and easily connected with special nozzles and "adapters", allowing you to get collapsible structures. Polypropylene pipes can also be used, but their connection will require a special welding machine or compression fittings, and finished products can no longer be disassembled.

Methods for connecting pipes in structures

From plastic pipes, you can make not only convenient household items, but also pieces of furniture. In order for such a home-made product to last a long time and be reliable in operation, care must be taken to properly connect the individual segments. Since about the connection polypropylene pipes has already been said, consider the docking of only PVC pipes.

PVC plastic pipes can be connected in the following ways:

• in a bell with a rubber seal;
• with the help of an adhesive composition;
• bolts by drilling holes.

The first connection method is characterized by simplicity, but insufficient rigidity. Before joining, it is recommended to clean the internal and external surfaces of the pipes at the joint from dust particles and treat the inserted part of the pipe with silicone grease. First, the pipe is inserted into the socket until it stops, after which it is carefully pulled back by 0.7 - 1 cm. The structures assembled in this way can later be dismantled, which is convenient for seasonal products.

The second method of assembling pipes is distinguished by reliable fixation and greater labor intensity. Work on connecting parts begins with the processing of the mating surfaces of the socket and pipe with sandpaper for better adhesion. Then they must be degreased with methylene chloride. Adhesive composition applied along the entire length of the prepared outer surface of the pipe and 2/3 of the length of the inner surface of the socket. Finally, the pipe is inserted into the socket until it stops and rotated a quarter of a turn. For gluing, it is required to press the parts for 1 minute. For good fixation, all operations to connect two segments must be carried out quickly enough. The connected elements are left for several hours until the adhesive composition dries completely.

The third method is more time consuming, as it requires marking and preparing holes, but allows you to get collapsible structures with a reliable connection.

For corner joints and connecting several segments at once in one node, it is convenient to use a variety of fittings. Plastic pipe structures can be of any complexity using numerous tees and fittings. Consider useful homemade in ascending order of complexity.

Original and functional little things for decorating the interior

Our review of interesting ideas is opened by the simplest products from a plastic pipe, which even novice masters of homemade art can make. In addition, such crafts require a minimum amount of material, and in some cases even the shortest trimmings can be used.

From scraps of pipes of large and medium diameter, you can make a convenient and practical organizer for your office or workshop.

There are two options available here:

• fastening with self-tapping screws to a wall or table, for which one end of the segment is cut off at an angle - a stationary option;
• gluing the segments together to form a stable figure is a portable option.

The segments can be left white or gray, or you can paint it in your favorite color. Such an organizer is indispensable for schoolchildren and people involved in creativity and needlework. With him, everything will always be at hand, and on the table - the perfect order.

Additional comfort on the desktop will be provided by a drawing tablet and a laptop stand, which can be made from small-diameter polypropylene pipes.

Bookshelves are a special element of the interior. Their presence in a certain way characterizes the landlord. corner shelf in high-tech style will not go unnoticed.

From numerous short cuts of different diameters, you can make a patterned frame for a mirror or photograph. It is enough to glue the cut rings according to a pre-prepared layout, which can be applied to a sheet of cardboard. It can be floral patterns or something abstract. The dimensions of the frame will depend on the amount of suitable material.

Scraps of large diameter can be used to create a comfortable shoe shelf with numerous compartments-cells. This design will not take up much space in the corridor and will ensure proper storage of shoes and a quick search for the right pair. The elements are connected using glue or self-tapping screws. To fix the shelf on the wall, you can use a plywood sheet, to which the assembled shelf is first glued.

Some crafts made from PVC pipes will really appeal to lovers of fresh flowers. A reliable flower stand is simple in execution and looks pretty.

For the manufacture of flower pots for transplanting or breeding pets, small pieces of sewer pipes are well suited. Having shown imagination, such pots can be decorated with colored paper, paint or bright stickers.

It is easy to make a stylish vase for artificial flowers and dried flowers from elongated cylinders of medium diameter. If you approach the implementation of this idea creatively, then it may turn out original gift for a significant event.

Another extraordinary idea for the interior is homemade techno-style lamps. There are a lot of execution options, but they all adhere to the principle of minimalism: no unnecessary details.

With the help of unused scraps, you can also make useful things in the hallway or corridor: a hanger for clothes and bags and a holder for garbage bags.

Crafts from plastic pipes for the playground

From PVC pipes, you can make a lot of crafts for children's entertainment in the yard: a developing rug, an arena, a swing, a sled, football goal, playhouse, outdoor shower and theater screen.

A very useful design for kids is a playpen made of PVC pipes.

Kids will love the lightweight swing that dries instantly after a warm summer rain.

In winter walks, homemade sleds will be the most reliable and fastest. The design is quite complicated, but with the help of practical videos you can figure it out.

For active games in the yard, safe football goals can be made from the remnants of plastic pipes.

Many children often dream of their castle in miniature. Making your childhood dreams come true is quite simple and not at all expensive. The frame is done very quickly. It remains to pick up a beautiful dense material for the roof and walls, and the house is ready!

The following structure will help to freshen up on a hot summer day. Such an open shower will be a joy not only for children, but also for adults.

From polypropylene pipes you can make a theatrical screen. It is enough to collect 3 frames, connect them together and close them with beautifully designed curtains. Home theater develops the creative abilities of children and creates good conditions for a fun time.

We update the interior economically: furniture made of plastic pipes

Crafts from plastic pipes with their own hands can occupy a key place in the interior. Craftsmen share many extraordinary solutions that can save a lot family budget. Let's highlight the brightest of them.

The most common and sought after piece of furniture is a chair. Using pieces of plastic pipes and connecting elements, you can make high-quality chairs different types: for children, folding for hiking and fishing, armchairs and even highchairs for feeding.

Having mastered the assembly technique a little, you can proceed to more complex structures. A neat bunk bed made of polypropylene pipes is a good alternative for country house or cottages, when buying a ready-made crib is too expensive. Moreover, when the kids grow up, the material can be used to make other useful crafts.

Glass Coffee table with a PVC pipe base in the next photo can hardly be called an amateur homemade product, because it looks like a design work.

One more original idea- shelving for the hallway or living room. Having independently designed a rack with the right number of shelves of the required size, you can not waste time shopping in search of something suitable.

Useful crafts for a country house and a summer residence

Unused and superfluous building materials will definitely find application in the summer cottage. Crafts from plastic pipes for summer cottages will significantly facilitate garden work, make your stay more comfortable and help you avoid high material costs. At the same time, the designs look neat and stylish.

From small lengths and a few tees, you can get a nice dryer for clothes and towels. It is easy to clean and does not corrode.

Relaxing by the pool or in the shade of the garden is impossible to imagine without a sun lounger. The photo shows a chaise lounge, completely consisting of plastic pipes, but can also be combined with dense matter.

Carport - one more useful application PVC pipes. It will protect transport not only from a rain, but also from the scorching summer sun.

For garden decor, a garden arch is often used, which can also be made of plastic pipes. A new element appears in its design - bent arcs. You can bend pipes for an arched vault by heating with a gas burner or boiling water. You can also put the pipe on a metal rod and, sticking one end into the soil, bend it in an arc. This method requires some physical effort.

A simple and light gazebo will decorate the garden and protect from the sun and light rain. For the presented option, it is enough to fix a waterproof raincoat fabric on the pipes and bend them on reinforcing bars. To make the design reliable, you need to take care of good fixation of the rods in the soil.

The range of application of plastic pipes is truly huge and limited only by your imagination and needs. You need a small woodcutter, a gate, a cart or a fishing rod stand - take required amount pipes and bring your idea to life.

It is easy to make a convenient feeder for chickens from sewer pipes. It is very convenient to pour grain with it without going into the corral. Chickens cannot rake grain in such feeders, which saves feed.

A small greenhouse in a summer cottage can also be made from plastic pipes. The easiest option: make a rectangular frame and cover it with a film or agrofibre.

A more serious construction - a seasonal greenhouse - will require more time and material. It is better to connect the elements with bolts so that it is possible to disassemble the structure into winter period. The optimal shape of the greenhouse is arched. To create it, the ends of the pipes are put on half-meter metal bars driven into the sides of the future greenhouse every meter. The dimensions of the greenhouse depend on the intended use. The greenhouse can be installed on the foundation or on the ground. Film, polycarbonate or agrofibre can be used as a covering material.

Plastic sewer pipes can also become a container for growing flowers, herbs and vegetables. Very often they are used to create vertical gardens.

To fence the site, you can use a low fence made of plastic pipes, which is durable and has minimal maintenance requirements (it does not need to be painted every year).

The use of plastic pipes is not limited to the ideas presented. This material is so versatile and easy to assemble (easy to cut, bend, has a variety of connecting parts) that it is simply impossible to ignore it in your home workshop.

Either from a desire to save money, or from an overabundance of imagination, our people have learned to benefit from those objects and things that a pedantic European would have sent to a landfill long ago. Greenhouses are built and palm trees are made, cute garden figurines are made of, and any garden furniture. Scraps of plastic pipes left after repair can also be used to good use. They make the simplest decorative things, beds, chairs and even greenhouses - the scope for imagination is huge, and we have collected only the most interesting ideas crafts made from plastic pipes that can serve as a guide to action or a source of inspiration.

Pipe connection methods

Plastic pipes are like designer parts. By combining segments of different lengths and connecting them at different angles, you can get anything: a beginner will be glad that he built the simplest hanger, and a professional will easily assemble a bunk bed. The main thing is to be able to connect the pipes correctly, and then it will be possible to do any thing necessary in the household.

Plastic pipes are a collective name, and which are made from polymers. The greatest demand is and. Segments of different lengths and diameters remain after the repair of engineering networks in an apartment or in a country house, and, as a rule, they are cluttered in pantries, or rather cluttered, until enterprising craftsmen began to use them for other than their intended purpose. Plastic pipes are characterized by low weight, high strength and durability, they are easy to maintain and safe.

Polypropylene pipes are connected using a special welding machine. It is expensive - it is more profitable to rent it, and it will take a little time to learn how to work with it. You can use compression fittings to connect. In any case, the assembled product will be non-separable.

When it comes to plastic pipe crafts, usually refers to PVC pipes, which can connect with each other in the following ways:

• socket connection with rubber seal. Manufacturers supply socket pipes with a rubber seal located at the end, thanks to which pipe connection work is carried out simply and quickly, and the joint is sealed. At the first stage, the socket of one pipe and the smooth part of the other are cleaned of dust and dirt. A chamfer is removed from the smooth end of the pipe (an angle of 15 degrees, chamfering cutters can be used) and a mark is applied indicating the depth to which the pipe will go into the socket. The sealing ring of the socket and the smooth part of the pipe are lubricated with a silicone compound and inserted one part into the other, focusing on the mark. For plumbing and sewerage good connection, and if you collect shelves or furniture, then it is not rigid enough. The main advantages: simplicity and the possibility of dismantling, therefore, such a connection is used for the construction of temporary buildings and things;
  
• adhesive connection. The ends of the pipes to be connected are chamfered (some just sand the surface), then marks are made indicating the depth of the fitting. The ends of the pipes are degreased with methylene chloride, then the adhesive is applied with a brush to the pipe and inside the chamfer or socket. The pipe is inserted into the fitting (or socket), rotated ¼ turn for better distribution of the adhesive, then the elements can be pressed for 30-60 seconds. It is desirable to carry out all work quickly. The remaining glue is immediately removed, and the connection is allowed to dry for several hours. The process is more laborious, but the joint is more reliable;
  
• flange connection. Separate sections are connected using special fittings. Before performing work, the ends of the pipes are cleaned. A flange is put on the cut, then a rubber gasket, onto which the flange is pushed. The elements are connected by means of bolts with a counter flange. Then the bolts are evenly tightened, due to which the alignment of the flanges is achieved. The connection is reliable, the design is collapsible.
  

When the technology of connecting plastic pipes is mastered, we can assume that almost any craft can be done. It is only important to draw a sketch in advance or make a drawing, and correctly calculate the length of all segments. You can build anything from such parts - we will list only some ideas for crafts from plastic pipes with our own hands.

No. 1. Organizer

The most unpretentious way to use the remains of plastic pipes. You can take pipes of small and medium diameter, even segments of small length will fit. The first option is a mobile organizer. It is enough to cut segments of different heights and glue them together in an arbitrary order or following some pattern (for example, one higher segment in the center, the rest around it). Such a stand is suitable for storing office supplies near the desktop or for organizing all kinds of bolts and other fasteners in the workshop.

The second option is stationary. On one side, the pipe must be cut at an angle (the most popular option- 45 degrees, but it can be less if small elements are stored). Then the cut elements are attached to a vertical surface using. You can mount the organizer elements on a wall or a specially installed board.

No. 2. Decorative frame or partition

Thin rings, which are easy to obtain when cutting plastic pipes, are a versatile material for creating decor. You can use pipes of different diameters - it's even more interesting. Plastic rings make a wonderful frame. It is enough to draw a layout of the future product on paper in advance and glue individual rings directly on it. From them you can get both a strict symmetrical pattern, and something chaotic. If you then paint it, then such a frame for a mirror or a picture can hardly be called a simple craft - it will be a cool designer thing.

Similarly, you can get a decorative partition. Gluing, of course, will take a little longer, but the effort is worth it. The partition will look very interesting, weigh a little and come in handy, for example, to delimit zones in the bathroom.

No. 3. Shoe rack and wine bottle holder

There are a lot of options to organize the storage of clothes using plastic pipes, and all these crafts are quite simple to implement.

No. 8. Rack for living room, hallway, pantry

By connecting several sections of pipes in necessary order, you can get a practical and inexpensive rack that will fully satisfy your needs in terms of size, shape and configuration. It can be both quite modest in size, and a real giant. If the rack is located in the living room, then the pipes can be painted, and glass or plywood can be used as countertops. When it comes to or a workshop, there is no particular need for decoration.

No. 9. Football goal

If country cottage area has, then you can build a small football goal. Only a few connections will need to be made, but before that, of course, everything will have to be carefully calculated and measured. When the frame is ready, a mesh is put on it, and the gate is ready. When the kids grow up, the product can be disassembled, and the pipes can be reused to create other crafts.

Similarly, you can make a small children's playhouse. We all once loved to build huts, gather there with a company and play. It was especially cozy and mysterious. The frame for the house of pipes is made elementary. Children will only have to throw a thick fabric over it and enjoy their own little castle.

No. 10. Arena for children

There is nothing complicated in the design of the playpen. However, the finished product in the store is not cheap. A budget alternative is available to those who have a decent amount of plastic pipes in stock, the time and desire to learn how to connect individual segments into a single structure. For manufacturing, you will need a lot of pipes, so home craftsmen advise you to just buy them in a store - it will still turn out cheaper than a ready-made arena, and the pipes can then be reused.

After the arena scheme has been created with an indication of its dimensions, pipes are cut. Vertical partitions are interconnected by short horizontal sections of pipes at the top and bottom. However, variations are possible in the design of the arena.

No. 11. Chairs made of plastic pipes

Here you will need already confident skills in connecting individual pipe sections. Depending on your desire and degree of preparation, you can make a simple children's stool, as well as a comfortable chair for adults, or even an armchair. After the frame is ready, the seat is made. It can be woven from thread, rope, or use a dense fabric. Then you can put soft pillows on top. Having mastered the manufacturing technique, it will be possible to build almost all the furniture for a summer residence.

No. 12. bunk bed

Yes, it is quite possible to assemble a frame for from ordinary plastic pipes. Not only supporting elements are made of pipes, but also a ladder, and, of course, lamellas under. The level of complexity here is increased, it is better to take up the work for those who have already tried their hand at making simpler crafts. Do not neglect drawing up a drawing and scrupulous measurements.

A bed made in this way will be a real find for country house a small area, because not everyone can afford to buy a ready-made bunk bed for a summer cottage, but somehow it is necessary to solve the placement problem.

No. 13. garden arch

How beautiful the arches entwined with plants and flowers look in the garden. The main difficulty in making a garden arch from plastic pipes is that individual segments will have to be bent. The easiest way to give the desired shape to the pipes using gas burner. A separate section is heated to a state where the material will succumb to deformation, then it is given the necessary shape. Someone decides not to bother and just connect several pipe sections at an angle. Then the upper part of the arch will resemble a trapezoid or a polygon in shape. Between the two arched vaults, horizontal elements are attached so that in the future the arch will be as much as possible covered with greenery. Do not forget to securely fix the structure in the soil.

No. 14. Alcove

Building with plastic pipes is much easier than anyone can imagine. If you take long enough segments, then you don’t even have to connect anything. Two pipes of the required length are arched and fixed to the ground. The distance between the elements of the future frame should be such that a dining table or other items fit. It remains only, and everything is ready.

The design of the gazebo may be slightly different, resembling a house in shape. In this case, you will have to connect individual elements.

No. 15. carport

The design itself is simple, but the difficulties can be associated with a decent size of the canopy, because it must be wide and high enough so that the car can safely hide under it. The frame is assembled with special care, fastened to the ground and to the adjacent wall, if any, covered with a dense awning fabric on top, which will protect the car from the scorching sun and rain. To call this product a handicraft, even the tongue does not turn - this is already a small architectural form.

No. 16. Greenhouse

A small greenhouse is done elementarily. You will need a few pipes, there will also not be very many connections. After the frame is assembled and fixed in the ground, it remains only to cover it with agrofibre. It will be possible to make such a greenhouse in just a couple of hours, and the benefits from it will be enormous.

No. 17. Greenhouse made of plastic pipes

A full-fledged build, of course, is more difficult than a greenhouse. It will take a lot more material, and it will take a lot of time. The size of the greenhouse can be almost any. The procedure is as follows:

From pipes, you can make a frame for a greenhouse of almost any shape, but the arched one remains the most preferable.

No. 18. seedling containers

If everyone in the country square meter on the account, it's time to implement the idea of ​​​​vertical gardens. Thus, it is convenient to grow greens and some berries. Scraps of plastic sewer pipes will make excellent containers if you cut holes in them in advance for seedlings and the outflow of excess water. It remains only to fill the soil containers and place the vertical beds one above the other. You can attach them again to the stand of plastic pipes. Some connect the beds with ropes and hang them from the wall - there are many options.

As a rule, after the replacement or construction of a water supply system, plastic pipes and fittings often remain. Of course, such material is no longer suitable for reassembling communication networks, but it can be used to make various decorative crafts and practical things.

If you wish and have free time, you can make a chair out of polypropylene pipes with your own hands - the assembly technology is very simple and can be done by any home master. Do you want to assemble original furniture, but don't know where to start? We will help you to realize your plans.

The article describes in detail three technologies for the manufacture of various crafts. By following these instructions, you can assemble a high chair, a kitchen stool and a portable fisherman's chair with your own hands.

There is something attractive about furniture created from improvised materials. So, plastic pipes allow you to make designs of ideal geometric shapes. They will add zest to the interior of the room. In addition, the owner of such furniture will have a great chance to show off to his friends a masterpiece he has created with his own hand.

Chairs made of plastic pipes have the following advantages:

• ease;
• compactness;
• strength;
• ease of manufacture.

And the most important thing is that they can be built with your own hands, in a relatively short time. This will require a minimum set of tools and materials, and a little patience.

It is necessary to start manufacturing a chair from polypropylene from the choice of the design of the product and its design implementation. At the same time, you need to build on the function that the furniture will perform.

If there are a lot of pipe scraps left, then you can build a chic creative chair from them or bar stool. To fasten parts, it is not necessary to have an iron for soldering, this can be done using special glue

Having decided on this, they begin to select the parameters of the product: the size of the future structure, its type (collapsible or solid), the method of connecting parts. You need to draw a rough sketch of the future product in order to understand how much and what material will be needed to work.

The design of PVC chairs is limited only by human imagination. To get ideas, you can look through interior design magazines or furniture catalogs. It is not necessary to look only at plastic products, ideas can be gleaned by looking at furniture made of any material.

Stools made of plastic pipes can be placed in the kitchen, country veranda, garage, and just in the yard - they will look stylish and original everywhere.

For trips to barbecue or fishing, you can build folding chairs that are convenient to store and transport when folded, while they do not take up much storage space.

For children, you can make comfortable and bright chairs by covering the frame of polypropylene pipes with a fabric of bright colors.

The process of building a chair

Creating an original chair from plastic pipes is quite within the power of any home craftsman or craftswoman. To work, you will need a minimum set of tools, which is sure to be found in every home and, of course, the remains of polypropylene pipes.

Step 1 - project of the future chair

At the first stage, it is necessary to decide on the purpose of the chair and its design. If you decide to make a bright chair for a child, you should definitely take into account the height of the small owner.

If you plan to use the stool in the kitchen or in the country, in order not to miscalculate with the size, be sure to measure the height of the existing furniture.

For those who first decided to try themselves in this creative and creative work, perhaps it is worth starting with the manufacture of the simplest design - a stool. It does not require a lot of skills and materials, and having coped with this task, you can begin to manufacture more complex structures.

Image gallery

Cut off a piece of fabric 18 cm wide. It is better to opt for a dense material with a water-repellent impregnation. A piece of tarp might also work.

Using a reinforced thread, sew along the narrow sides of the rectangle so that you get holes for the pipes. If threads are pouring out of the fabric, then it is better to tuck it and stitch it on all sides, but allowances must be taken into account even before the fabric is cut